HVM Automatic Bollards

Our range of IWA 14-1 and PAS 68 rated automatic bollards are designed to withstand a higher physical impact than our standard bollard systems, whilst still maintaining the same aesthetic to fit in with the local surroundings.

hvm bollard

Hostile Vehicle Mitigation (HVM) Bollards

Vehicle Security Barriers (VSBs)

With the unfortunate threat of vehicle borne attacks within the UK and elsewhere, there comes the need for reliable and effective Hostile Vehicle Mitigation measures.

Many deterrents and preventative measures are taken to combat vehicle borne threats, including the use of high security infrastructure to mitigate the opportunity of such threats to take place. Vehicle Security Barriers (VSBs) are designed to assist with hostile vehicle mitigation measures, and we provide a range of impact tested bollards tested to meet IWA 14-1 and PAS 68 specifications.

What are impact tested bollards?

As vehicle security barriers (VSBs), such as HVM bollards, are designed to help counter against vehicle borne attacks, they are commonly used to protect high profile sites and secure locations. With the use of HVM bollards as a means of perimeter protection, a variety of standards have been prepared to address the needs of those who wish to have the assurance that the bollards will provide the level of impact resistance they require.

Our range of HVM automatic bollards have been tested to a number of these standards, including ISO IWA 14-1:2013 and BSI PAS 68:2013

ISO IWA 14-1:2013 is an International Workshop Agreement which specifies the essential impact performance requirement for a vehicle security barrier (VSB), and a test method for rating its performance when subjected to a single impact by a test vehicle not driven by a human being. It is supported by IWA 14-2, which is designed to provide guidance on VSB selection, use and installation.

BSI PAS 68:2013 is the latest Publicly Available Specification in the UK for Vehicle Security Barriers, such as automatic rising bollards. The rating a product receives is dependent on several factors, including test vehicle type, vehicle travel speed and vehicle weight. BSI PAS 69:2013 provides guidance on the selection, installation and use of vehicle security barriers tested to PAS 68 specifications.

Our range of HVM Automatic Rising Bollards

K4 automatic bollard

275/K4 -900A

Current models are the result of our 40 years’ experience in the security field and in excess of 20 years in the specific design and manufacture of high security automatic bollards. The 275/K4 900A PAS 68 security bollard is recommended for use in any security sensitive application where hostile vehicle mitigation is required.

The K4 275/900A security bollards are available with a number of optional accessories, that allow you to fully customise your system according to your security needs.

CERTIFICATION:

PAS 68:2013 V/7500(N3)/48/90:1.0/2.5
IWA 14-1:2013 V/7200(N3)/48/90:1.0
ASTM F2656-18a C730 P1

275/M30-1200A

Macs M30 275/1200 automatic bollards have been produced and tested to ensure a high level of perimeter defence, certified to ASTM F2656-07 M30 (K4). The 275/M30-1200A bollard is recommended for use in any security sensitive sites where hostile vehicle mitigation is required.

The M30 275/1200 bollards are available with a number of optional accessories that allow you to customise your system according to your security needs.

CERTIFICATION:

PAS68:2013 V/7500(N3)/48/90:4.6/4.9
IWA14-1:2013 V/7200(N3)/48/90:4.9

ASTM F2656/F2656M-20 C730 P2

275/K12-900A

Macs 275/K12-900A automatic bollards have been produced and tested to ensure a high level of perimeter defence, being certified to DOS SD-STD-02.01 K12 L1. K12 275/900 bollards are recommended for use in any security sensitive sites where hostile vehicle mitigation is required.

Our K12 275/900 bollards are available with a number of optional accessories that allow you to customize your system according to your security needs.

CERTIFICATION:

PAS68:2013V/7500(N3)/80/90:9.3/29.1
IWA14-1:2013V/7200(N3C)/80/90:9.6
ASTM F2656/F2656M-20 C750/7200 P3

275/M50-1200A

Macs 275/M50-1200A automatic bollards have been produced and tested to ensure a high level of perimeter defence, certified to PAS68:2013 V/7500(N3)/80 AND ASTM F2656-07 M50 (K12)

Our M50 275/1200 bollards are recommended for use in any security sensitive sites where hostile vehicle mitigation is required.

The M50 275/1200 bollards are available with a number of optional accessories that allow you to customize your system according to your security needs.

CERTIFICATION:

PAS68:2013 V/7500(N3)/80/90:1.4/8.0
ASTM F2656-07 M50 (K12)

For A FREE Quote Or To Discuss Your Next Project

Please Call 0161 320 6462

Shop Our Range of HVM Automatic Bollards

  • All Products
  • Automatic Bollards
  • Bollards
  • HVM Automatic Bollards
  • Hydraulic Automatic Bollards
  • Hydraulic HVM Automatic Bollards
  • Electric Automatic Bollards
  • Electric HVM Automatic Bollards
  • All Products
  • Automatic Bollards
  • Bollards
  • HVM Automatic Bollards
  • Hydraulic Automatic Bollards
  • Hydraulic HVM Automatic Bollards
  • Electric Automatic Bollards
  • Electric HVM Automatic Bollards

M50 275/1200A

Rated 0 out of 5

M30 275/1200A

Rated 0 out of 5

K4 275/900A

Rated 0 out of 5

K4 275/700A

Rated 0 out of 5

K12 275/900A

Rated 0 out of 5

275/M50EMB 1200A

Rated 0 out of 5

275/M30EMB 1200A

Rated 0 out of 5

275/K4EMB 900A

Rated 0 out of 5

275/K12EMB 900A

Rated 0 out of 5

Speak to the Bollard Experts!

Request A Free, No Obligation Callback

For information on the data we collect, please see our privacy policy.